Connect


Flag




8.8 Flag: Combine digital inputs using a logical operator.






flag



Combine digital inputs using a logical operator.
Inputs will be combined together by applying the logical operators defined by the 'mode'
property and the corresponding result will be provided as output.
Inputs can be one or more, depending of how much devices are linked to him.




Properties:


Property Description Range Default
name Name of the Gate service - -
mode Gate mode.
It defines what logic operator shall be applied for the Gate.
And
Or
Xor
Nand
Nor
Xnor
And
trigger Set this property when the linked object is a timer or other object that have a time depending behaviour. In other words when the linked object is sensible to the edge of the signal and not its level level.
In this way all the commands are not confirmed again after the first has been submitted, and the overall behaviour is correct.
In case of trigger property unset, it can happen that the level is periodically confirmed (e.g. if there is a radio connection). This is done to be sure that the status of the target object is the desired one.
Yes/No No
displayshow Show in local display if any Yes/No Yes
descr description of the purpose of the Gate in your project. - -


Top

<< Index >>